01-01-08, 02:32AM
|
#31
|
|
Join Date: Feb 2007 |
|
Posts: 13
|
|
|
|
Quote:
Originally Posted by simsb52
Harry, I have not seen the new rollmaster set up as you described.
But unless you have a bushing on both sides of the cam plate
( I have bearings on both sides) I cant see having a bronze
bushing on the outside (between the camplate and sprocket)
will do any good. At wide open throttle the cam wants to
push out the front of the engine. On any cam plate...If you
look at which side of the plate is worn...its the block
side....which means the cam is pushing out wards.
As far as dyno results on the bronze bushing....Have you
seen the results posted somewhere? I can give you a copy of
my results if you like!
Thanks for the interest...
Scott Sims
Sims Performance Machining
|
Scott, installed mine last week, good instructions went real easy. My machinist was very impress. Thanks for such a great product.
|
|
|
|
01-01-08, 02:04PM
|
#32
|
|
Join Date: Jun 2005 |
Location: Loveland, CO |
Posts: 211
|
|
|
|
Simms Performance Machining
I installed one of Scott's pieces on my 497. I thought it looked VERY nice and much more importantly so did my machinist who has built all brands from 4bangers to BIG HP blower and /or N2O engines.
PHILLYGOAT
|
|
|
|
|
11-12-15, 06:21PM
|
#33
|
|
Join Date: Oct 2007 |
Location: Kenner, LA |
Posts: 33
|
|
|
|
Need to Contact Sims Performance for Roller Bearing Thrust Plate/Timing Chain Set
Can someone please help me get in touch with Sims Performance Machining? I've called the number (812-579-9815) posted in this forum and get "mailbox is not setup for voicemail" message. Sent message to email address (simsb52@qmix.net); it was returned non-deliverable. Thanks
|
|
|
|
|
11-12-15, 07:38PM
|
#34
|
|
Join Date: May 2003 |
Location: .... |
Posts: 18,774
|
|
|
|
Called and got the same message. That's funny I bought one from him a while ago ( 3-4 ) and was always able to contact him from that number.
__________________
The things they hide, the way they spin things, the excuses that they make and the things they omit. 
|
|
|
|
|
11-13-15, 12:31PM
|
#35
|
|
Join Date: Dec 2004 |
Location: Frederick, MD |
Posts: 181
|
|
|
|
Well that sucks, wanted to buy one after I get my street turbo motor closer to being done. We have one in the IAII nitrous motor already and no problems good product.
|
|
|
|
|
11-16-15, 06:41PM
|
#36
|
|
Join Date: Oct 2007 |
Location: Kenner, LA |
Posts: 33
|
|
|
|
I was finally able to get in touch with Scott using this email address: simsb53@gmail.com
He did give me his cell number, but I would have to check with him first about giving it out. |
|
|
|
|
11-16-15, 10:14PM
|
#37
|
|
Join Date: May 2003 |
Location: .... |
Posts: 18,774
|
|
|
|
Glad you were able to get a hold of him he's a good guy to deal with. It's a real nice set up.
__________________
The things they hide, the way they spin things, the excuses that they make and the things they omit.
|
|
|
|
|
08-27-17, 07:45PM
|
#38
|
|
Join Date: Jul 2017 |
Location: Staten Island N. Y. |
Posts: 1
|
|
|
|
Greetings all, I'm new here and deciding to put my High School car back on the street after som 30 years....marriage and kids.... some me time is necessary. Have collected some parts to do a build before I got married, JW Wheel, Fluid Damper balancer and the first set of Crower forged rods out of the door sold to the public...yes it was that long ago... I saw this sims product and was interested though not able to find any information... asking is anyone knows if they are still produced. Cam retainer and timing set. Thanks for any help
Joe
|
|
|
|
|
08-27-17, 08:53PM
|
#39
|
|
Join Date: May 2003 |
Location: .... |
Posts: 18,774
|
|
|
|
Welcome...Go to post #36 his e-mail address is posted there. I'm not 100% sure but I think they still are. Looking forward to your build progress. Nice bunch of knowledgeable guys here more than willing to help in anyway.
__________________
The things they hide, the way they spin things, the excuses that they make and the things they omit.
|
|
|
|
|
10-06-17, 09:15PM
|
#40
|
|
Join Date: Aug 2010 |
Location: norwood ma 02062 |
Posts: 407
|
|
|
|
This is not the Simms setup but on Butler Performance on it front page has a comp cam timing set CCA7112 with a Torrington roller bearing instead of the bronze bushing PS I don't no how long it been on the market. It maybe old news.
Last edited by thomas flaherty : 10-06-17 at 10:07PM.
|
|
|
|
|
10-07-17, 03:02PM
|
#41
|
|
Join Date: May 2003 |
Location: .... |
Posts: 18,774
|
|
|
|
Nice that they finally offers one
__________________
The things they hide, the way they spin things, the excuses that they make and the things they omit.
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -3. The time now is 05:20AM.
|
|
