will this work?

I want to melt some of the lead off my bird. its not alot. like like 8 small puddles. will this tourches work?

[sprint250]

use the big one and heat evenly.
Wire brush and a 100% cotton rag will help remove the molten lead.
Try not to inhale the fumes .If you have to sand it clean to get bare metal prepped for welding wear gloves and a mask lead dust is highly toxic.

will these work?

I used mapp gas on mine. Removing the old lead and putting back

chuck was the bottle less then 5 bucks? I'm thinking of getting a few, but if they cost more then 5 i might look around and see if i can get a bigger bottle

It was right around 5 bucks and they last a long time.

cool, I will try that and use a wire brush and cotton rag like sprint250 said

[sprint250]

Good ventilation, longsleeves and goggles.The stuff has a tendencey to splatter and it burns like a B---- !
No fun gettin' a hot beebee in yer eye!
You can use white cotton gardening style gloves to wipe the solder/lead away too .You just have to be quick about it so's you don't burn through the glove.I've used this method for soldering water pipes for years because it saves your hands when you want to wipe the fittings of excess solder.
They can usually be had in small 25 pr. bales at plumbing and industrial supply houses
[cheers]