> Parts & Cars For Sale & Wanted
User Name

Parts & Cars For Sale & Wanted Remember - not all who view this board are members who have access to your E-mail address or PM. So post your Asking Price, Pics ,e-mail address, phone number, area code ( so one could get shipping cost ) and a good Description.

sponser links

Thread Tools
Old 12-20-09, 11:32AM   #1
Registered User
Join Date: Apr 2006
Location: St-Mathieu-De-Beloeil, Qc, Canada
Posts: 14
Default Ported 260 cfm RAM AIR III heads, aftermarket cam & 9.3:1 pistons FS

Ported 260 cfm Ram Air III iron heads (1970 with bored out combustion chamber)
gives 9.3:1 compression with custom dished pistons For sale also

With 10.8:1 compression pistons, these heads went 10.37@129.77 mph in a 2950 lbs car (with driver). Caged and all. Went 10.95@120.88 mph in a 3550 lbs 73 firebird with stock suspension, 90#90 shocks and a roll bar. Had stock rods with aftermarket pistons.

With 9.3:1 compression it would be good 11-second street car setup.

I also have the cam for sale (that it went 10.37 with). It's a good cam for a street setup, makes good torque. He shifted at 6200 RPM on stock rods when he went 10.37.

In a heavy street car it would be good for 11's with 9.3 compression.

Selling because we have another 455 in the car now bored to 462 with eagle rods, flat tops, 12.5 compression and Edelbrock aluminum heads. Going for 9's.

I am near Montreal, Qc, Canada, about 30 minutes north of the US border. I also have a 455 block and a 400 block for sale. We have a 428 crank and a 400 crank I believe too. All 1970-1974. The strongest.

Ideally, make an offer and come pick it up.
JClaw is offline   Reply With Quote
Old 12-25-09, 08:32AM   #2
Registered User
arrowem's Avatar
Join Date: Aug 2009
Location: Duluth,MN
Posts: 23

Price on the heads? cc's (72?) Pics?
arrowem is offline   Reply With Quote
Old 01-22-10, 08:39PM   #3
Registered User
Join Date: Jan 2010
Location: Winnipeg, Manitoba
Posts: 5

Price (as per Forum rules) still for sale ?
Chamber cc ? ...and who did the porting ?
Contact # ?


Last edited by PONTIAC-ONE : 01-22-10 at 08:44PM. Reason: correction
PONTIAC-ONE is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Roland Racing Ported CV-1 Heads: Pontiac Dude Parts & Cars For Sale & Wanted 0 08-26-09 02:28PM
Aftermarket Cylinder head stack ranking discussion Bruce Wilkie Engine Tech Discussion - Street or Strip 119 12-15-08 12:51PM
Dish pistons or swap heads? Sergef Engine Tech Discussion - Street or Strip 12 06-08-08 05:58PM
SD Edelbrock VS SD KRE ported heads Gach Engine Tech Discussion - Street or Strip 16 11-02-07 05:35AM
Edelbrock heads ported on the shelf ready to ship at Pure Pontiac ANDY MITCHELL Aftermarket News & Products 25 09-15-07 11:53AM

All times are GMT -3. The time now is 04:25AM.

Featured Ads
Ken's Speed & Machine
Mayhem Turbocharging

Carter Cryogenics.  What can we freeze for you?

Pacific Performance Racing

Central Virginia Machine Service.  Home of the Injun Engine!

All Pontiac Engine Kits

Larry's Auto Machine.  Full serivce auto, marine machine shop, domestic and foreign.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
2001 - 2007 PontiacZone.com
Page generated in 0.06669 seconds with 19 queries