> Parts & Cars For Sale & Wanted
User Name

Parts & Cars For Sale & Wanted Remember - not all who view this board are members who have access to your E-mail address or PM. So post your Asking Price, Pics ,e-mail address, phone number, area code ( so one could get shipping cost ) and a good Description.

sponser links

Thread Tools
Old 01-15-12, 11:50AM   #1
Ken Keefer
Registered User
Join Date: Apr 2011
Location: Brooksville, Fl.
Posts: 164
Thumbs up Lots of Misc. Parts For Sale:

Misc. Parts For Sale: 01/01/12

Pontiac Starter/solenoid heat shield… Have 2 used. $10.00 each

New Custom Comp Cam Solid Roller: Installed degreed, but never run.
283/300@.050 duration
112/114 Cl/LSA
.020/.020 lash
.4710/.4420 Lobe lift............................ $325.00 includes shipping

Comp Roller springs: #26028: New in the box
406 lbs@2.200 1074 lbs@1.200
with new 735-16 Titanium retainers included:……..$700.00

455 Pontiac block: was run and freshened. 3 center billet caps. ARP main studs.
Filled 1/2" up front WP holes. Line bored. Galleys tapped. Deck is 0-ringed. Honed to 4.214 Decked. Brass Freeze plugs. New cam bearings. Just rinse clean block & ready to go. $1200.00

NEW............ BRC Custom pistons for IA block and **** heads:
Bore: 4.350
Skirt diameter: 4.343
Compression height: 1.255
Pin: 990/2.930
**** Intake notch: .260 deep.
Valve cut: 2.350 diameter.
Comes with pins, locks and oil ring spacers. My loss your gain......$550.00

4 sets of NEW std wrist pins. Specs are; .980 X 2.750
Right around 150 grams………$75.00 a set includes shipping in USA.

L2262F +.040 Forged 400 piston:**New** ONE only; discolored slightly on top. Been sitting out for awhile. One only in a box….$30.00
Summit price.......... TRW-L2262F Speed-Pro Power Forged Pistons

Piston, Forged, Flat Top, 4.120 in. Bore, 5/ 64 in., 5/ 64 in., 3/ 16 in. Ring Grooves, Pontiac, 400, each..... $45.95

5/16" Moly pushrods. 7.040"…. used good shape............. $50.00

5/16" Black Moly Pushrods: 8.600"…. used good shape……..$50.00

3 sets of #143 complete Pontiac heads........... offers ????
3 sets of 7H1 take off head castings. pressure washed. Complete….$35.00

1967 Pontiac front block timing assembly; Cover, 2 W.P plates, balancer, pulley set up w/aftermarket A/C grooved pulleys. Excellent condition. All cleaned and painted for only.... $300.00

20 - sets (new) of 67 & up Pontiac intake gaskets. (Mr. Gasket type).... $5.00 pr.

8 -NEW 301 Pontiac Flat top .060 pistons non turbo. (sell below cost)....$60.00

Good Pontiac stock rods (cleaned and checked for size) about 300 of these.... (each) $12.50

400 Pontiac Thrust Only bearings: 'standard' size thrust bearings. No over or undersize available. I have about 40 sets both race & replacement... $5.00 each & get one free.

Glasstek Bolt on fiberglass hood with forward facing scoop: Paid extra to have them mold in in. Perfect fit. Fits 1970 thru 76 Firebird and T/A.
Measurements. all are underside measurements.
Opening: 18" X 30" X 6 1/2"
Tapers back and down.
In from sides: 20"
Opening starts 30" back from front edge.
This is a bolt on hood that even has the location for a hood latch, but I used 2 pins up front. I had a pan back then that fit flat on my Dominator and fit tight underneath when the hood was closed.
Forward hood is worth some MPH........... $525.00 ........ or ????????

T-400 Pontiac tranny cores: $50.00 each

Chrome Brackets for Pontiac 76 T/A Big Alternator....... $75.00

3 Long windage trays............ $35.00 each

Aluminized Mandrel bent 3" tailpipes for a 1970 thru 81 Firebird and T/A.
They have Flowmaster 3.5' to 3" longer flowing reducers welded on along with 3 bolt flanges.Little indent from when a driveshaft let go years ago. Also where they go together but not an issue. New they are $200.00 plus and no reducers or bolt on flanges. Also include 4... 3" clamps....................$125.00

1966 389 AFB Pontiac factory 4 bbl cast iron Intake.
Cleaned. This is not a Q-jet intake. Has all 4 holes the same size.
Will fit 66 and newer.........$75.00 or ????????????

66 GTO Stuff:
2 65/66 GTO Tempest; front upper control arms.
2 rear AC/Delco shocks Like new Cheap.
I also have the 2 front spindles, backing plates with brakes (1 drum is wore out), but noticed that they were each were different when I pulled them from my old 66 GTO and takes a different brg and seal. (I installed disc brakes).... Make offer.

Have lots of HPP and P.E. mags from the early 90's thru 2000 and up till current left. See other ad for listings....... $2.00 each.

Nitrous parts: Rebuild solenoid kits, lines, assorted stuff. All NOS brand. Call or E-mail. Sell 50% off all new stuff.

Electric fan and steel shroud for VW style racing radiator, went to a different style. Both same side openings Works great.... $30.00

2 used T-400 yokes (each).... $40.00

Used Moroso water pump drive kit. Both pulleys, motor and mounting plate.
Less bolts and spacers...... $35.00

Moroso Water pump drive belts: NEW (3 available) pt #9723.........$5.00 each

(2) 3.5 inch Exhaust pipe Band Clamp: NEW. Walker Extra heavy duty bolts that take 5/8" socket to tighten. Stainless Steel.............Cost me $18.00 Selling..........$5.00

10 Bolt Chrome Rear End Covers: (have 3) for 8 7/8" Ring gear. NEW Fits most GM intermediates '65-'83, Camaros 1973-'77 axle types M & P. Looks like the Mr. Gasket part # 9891 but with a drain plug...........$10.00 each

T/A Dude Scoops are Finally available.
Finally got my dude out of retirement to run off a Baker's dozen T/A Hoop scoops. They are back up on our website. Same mold as before. Get em while they're hot... $139.95

455 Olds; Block/caps only were tanked. Was saving but ain't gonna be going that way. No cracks and std bore that looks to clean up .030
Nice start to replace one of those 403 T/A engines, etc.....$300.00
** Ken's Speed & Machine Shop. **
Your ATI ProCharger Dealer: PONTIAC Centrifigul Superchargers for Traditional Pontiac engines.

We specialize in Hydraulic Roller Street/Strip Engines.
## Street legal. 3425lbs, Pump gas. Hyd roller 9.30 @144 ##

Feel free to call 352-796-8800 weekdays, PM or e-mail. pdsales@tampabay.rr.com
I build, sell & specialize in ALL American Muscle Iron.
Ken Keefer is offline   Reply With Quote
Old 04-02-19, 03:27PM   #2
Bad 68 Bird
Robsinno1's Avatar
Join Date: Oct 2007
Location: Kenner, LA
Posts: 37
Default 68 Firebird Hood Latch Assembly

Hey Ken, do you know where I can get a Hood Latch Assembly for a 68 Firebird? Thanks
Robsinno1 is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Misc. trans am parts bren5666 Parts & Cars For Sale & Wanted 1 08-19-10 01:46PM
Misc GTO/Lemans/Other parts Slantback Parts & Cars For Sale & Wanted 2 04-27-09 12:12AM
Lots of Parts BDAMIDGET Parts & Cars For Sale & Wanted 1 03-29-08 03:28AM
1967 Grand Prix Catalina Misc Ac Parts ++ Cheap! DEDSLEDS Parts & Cars For Sale & Wanted 0 01-28-08 05:38PM
Misc parts for sale LIB780 Parts & Cars For Sale & Wanted 0 01-02-08 06:01PM

All times are GMT -3. The time now is 09:01AM.

Featured Ads
Ken's Speed & Machine
Mayhem Turbocharging

Carter Cryogenics.  What can we freeze for you?

Pacific Performance Racing

Central Virginia Machine Service.  Home of the Injun Engine!

All Pontiac Engine Kits

Larry's Auto Machine.  Full serivce auto, marine machine shop, domestic and foreign.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
2001 - 2007 PontiacZone.com
Page generated in 0.07246 seconds with 19 queries