Pontiac 383 Short Block!!
This is the same short block as the HPP article MINUS block fill and no hole balance. But this block has been chamfered on BOTH intake AND exhaust sides of bore for Big Valve heads. And this block is a 73 with 5 motor mount holes so you can put it in anything.
The parts and work consist of:
Parts: 383 Ultra-Lite I beam assembly(Tomahawk 6.8 Ultra-Lite Connecting Rods, 383 Crank, SRS 383 Pistons, King AM/SI Rod Bearings, King AM Main Bearings, Total Seal Rings, Balance Assembly, Piston & Rod Pin Fit), ARP 2 Bolt Main Studs, Brass Freeze Plugs, Cam Bearings, 2 pipe plugs, 1 pipe plug with hole for dist, new dowel pins for deck, BOP rear main seal.
Machine work and labor consist of:
Thermal Clean block, Align Hone mains, Bore & Hone w/tq plate, Surface Block, Mocked up for zero deck, install cam bearings, Hang Rods & Pistons, Clean & Rifle Brush crank, File fit rings, assemble short block, tap 2 oil galley plugs, wash & Brush block, Debur & grind block for quick oil return.
All for $3095 plus shipping. Any questions call (310) 832-4596