PONTIAC ZONE TECH FORUMS
 

Go Back   PONTIAC ZONE TECH FORUMS >
Engine Tech
> Proven Engine Combinations
User Name
Password

Proven Engine Combinations Engine combinations, and the resultant HP and/or E.T.s

sponser links

Reply
 
Thread Tools
Old 12-14-13, 02:46PM   #1
ta man
Registered User
 
Join Date: Apr 2011
Location: Clinton Ontario
Posts: 222
Default 11 second street car combo

462 SD 290cfm KRE 85 cc heads,SD's "Old Faithful" hyd roller cam,1.65 Harland Sharpes,Torker 2 intake,Holley 950 hp,Hooker 1 3/4 headers,3 inch X crossover into 2.5 inch Walker Ultraflows into 2.5 inch tailpipes,Mallory 140 fuel pump,8AN lines,1/2 RobbMc fuel pickup,deadhead system,th 350,Continental 3200 stall,3.08 gears,3900 lb 80 Trans Am...Runs on 87 octane idles at 850 rpm...runs mid 11's at 118mph plus..
ta man is offline   Reply With Quote
Old 12-14-13, 03:48PM   #2
Gach
Administrator
 
Gach's Avatar
 
Join Date: May 2003
Location: ....
Posts: 18,590
Default

Awesome! Killer streetůstrip car.
__________________
The things they hide, the way they spin things, the excuses that they make and the things they omit.
Gach is offline   Reply With Quote
Old 12-17-13, 10:37AM   #3
Jeffs 64
Registered User
 
Jeffs 64's Avatar
 
Join Date: Jun 2007
Location: Pgh, Pa
Posts: 476
Default

Turbo 350 with 3.08s, nice set up!

A return to the tank might be in the cards for you, I find it helps mix the water with the fuel... This new gasoline sucks moisture like crazy!
Jeffs 64 is offline   Reply With Quote
Old 12-18-13, 09:10AM   #4
ta man
Registered User
 
Join Date: Apr 2011
Location: Clinton Ontario
Posts: 222
Default

Thats on the agenda for this year..I do have a return regulator in the shop and a 8AN return on the tank...Also the return setup is so much easier on the pump and quieter...Pretty easy job on this car.
ta man is offline   Reply With Quote
Old 12-18-13, 11:48AM   #5
Mb125
Registered User
 
Mb125's Avatar
 
Join Date: Mar 2005
Location: AZ
Posts: 4,057
Default

Always the best route for a car that puts on a lot of street miles. I burnt out a few pumps back in the Day before a return system.
__________________
You can shear a sheep many times, but you can only skin them once.
Mb125 is offline   Reply With Quote
Old 12-18-13, 07:50PM   #6
ta man
Registered User
 
Join Date: Apr 2011
Location: Clinton Ontario
Posts: 222
Default

Just before my last track outing this year my pump gave up in the shop...luckily I had some spare brushes..I have an older style Mallory you can pull the brushes with out removing the pump from the car...still a pain though.
ta man is offline   Reply With Quote
Old 11-16-14, 08:31PM   #7
ta man
Registered User
 
Join Date: Apr 2011
Location: Clinton Ontario
Posts: 222
Default

Update on this combo..best this year 11.4031 at 118.65mph...added a Wilson tapered spacer.
ta man is offline   Reply With Quote
Old 11-17-14, 12:09AM   #8
Gach
Administrator
 
Gach's Avatar
 
Join Date: May 2003
Location: ....
Posts: 18,590
Default

Quote:
Originally Posted by ta man View Post
Update on this combo..best this year 11.4031 at 118.65mph...added a Wilson tapered spacer.
Nice!
__________________
The things they hide, the way they spin things, the excuses that they make and the things they omit.
Gach is offline   Reply With Quote
Old 11-27-14, 10:51AM   #9
Mr.Pontiac
Registered User
 
Join Date: Feb 2003
Location: Weirton WV
Posts: 1,852
Default

Great times!! Like i always knew it takes cubes to get into 11,s but there are alot of 400,s doing it , with alot of more work.
Mr.Pontiac is offline   Reply With Quote
Old 12-02-14, 09:38AM   #10
ta man
Registered User
 
Join Date: Apr 2011
Location: Clinton Ontario
Posts: 222
Default

I'm pretty sure if my heads were 72 cc and you put my cam in a 400,use 3.73 gears and a 3800 stall it would work pretty good!
ta man is offline   Reply With Quote
Old 05-26-15, 07:50AM   #11
ta man
Registered User
 
Join Date: Apr 2011
Location: Clinton Ontario
Posts: 222
Default

Update new best 11.3893 at 120.63
ta man is offline   Reply With Quote
Old 05-26-15, 09:30PM   #12
Macho78
Registered User
 
Macho78's Avatar
 
Join Date: Nov 2008
Location: Glendale, Arizona
Posts: 80
Default

Awesome street/strip set up!
__________________
78 Macho T/A #123 11.78@115.5 on motor 10.66@127.9 w/190 shot.
Macho78 is offline   Reply With Quote
Old 08-14-15, 04:52PM   #13
10second70gp
Registered User
 
Join Date: Nov 2005
Location: toms river nj
Posts: 78
Default

Quote:
Originally Posted by ta man View Post
Update new best 11.3893 at 120.63
Nice job , what's the 60 ft man if it wasn't so heavy it would be in the tens . With gear n converter it'll get there .
__________________
78 PONTIAC GRAND AM 1,000HP PUMP GAS DRAG RADIAL CAR . CHASSIS SETUP FOR 8.50'S

87 BUICK GN MY HIGH SCHOOL DREAM CAR RUNNING TENS LOOKING ALL STOCK W/A/C.
10second70gp is offline   Reply With Quote
Old 08-14-15, 05:05PM   #14
Gach
Administrator
 
Gach's Avatar
 
Join Date: May 2003
Location: ....
Posts: 18,590
Default

Hp is definitely there for it.
__________________
The things they hide, the way they spin things, the excuses that they make and the things they omit.
Gach is offline   Reply With Quote
Old 08-15-15, 04:29AM   #15
ta man
Registered User
 
Join Date: Apr 2011
Location: Clinton Ontario
Posts: 222
Default

60 fts in the 1.65 range..yes more gear and convertor would help!I'm seeing how far I can drop et just with the 3200 Continental and 3.08 gearing..great on the highway!I have a new transmission going in soon with a 2.75 first gear that should knock a little off the 60,I've also dropped a little weight off the front,and using 15x4 Draglites on the front with M/T SR 165's..that dropped 6.8 lbs off each side..
ta man is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 4 (0 members and 4 guests)
 
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
464 E-head street combo torqjunki Engine Buildups in progress 19 07-29-11 04:02PM
Need Cam advice for 400 street combo... 69-BIRD Engine Tech Discussion - Street or Strip 7 12-19-08 07:45PM
406 Street Combo OLDFLM72 Proven Engine Combinations 0 02-04-08 10:40AM
Chris, does this sound like a good combo for running street nd500 Transmission TECH 1 03-15-03 07:35PM


All times are GMT -3. The time now is 10:31AM.

Featured Ads
Ken's Speed & Machine
Mayhem Turbocharging

Carter Cryogenics.  What can we freeze for you?

Pacific Performance Racing

Central Virginia Machine Service.  Home of the Injun Engine!

All Pontiac Engine Kits

Larry's Auto Machine.  Full serivce auto, marine machine shop, domestic and foreign.

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
2001 - 2007 PontiacZone.com
Page generated in 0.18989 seconds with 43 queries